PRODUCT BENEFITS

  • Lubricates Faster
  • Better Protection

TOOLS AND ACCESSORIES

INCLUDED IN THE PACKAGE:

  • Pump (with motor and power source inside) x1
  • Removable transparent beakers x2
  • Protective Rubber Gloves x1

NEED TO PREPARE:

  • Engine oils (1 Litre pack) x2
  • Tissues
  • Oil Stain Remover

RECOMMENDED OILS FOR COMPARISON:

  • Shell Helix Ultra 0W vs oils of other viscosity
  • Other viscosity oils of 10W or 5W

DEMO PROCEDURE

PREPARATION

  • Place the tool on a level surface, unscrew the screws on each side panel and take the transparent cover cover off the front panel.
  • Place the two 1 Litre bottles of different viscosity oils into the slots at the bottom, unscrew the bottle caps and feed the pipes through the holes until they are fully inserted into the bottles.
  • Replace the transparent cover and screw on, then plug in the power source.

DEMONSTRATION

  1. Press the button on the top right panel to switch on the pump. The oils will begin to be pumped from the bottles into the transparent beakers above.
  2. As one of the beakers is nearly full, press the button again to switch the tool off.
  3. You will see which oil is being pumped and drained faster.

KEY OBSERVATIONS

  • During the demonstration, you will see how rapidly Shell Helix Ultra 0W is being pumped into the beakers.
  • Imagine the volume difference on a full-size engine on start up.

POST DEMO

  • Next round demo can be performed when the oils are fully drained back to the bottles below.
  • When the demo is done, please apply oil stain remover to the tool and use a cloth or tissues to wipe clean before storing them in a safe place.

PRECAUTIONS

FOR THE DEMO

  • If different sets of oils are to be compared, please make sure all of the oil in both beakers are drained, and pumped out any oil left in the pipes to avoid mixing the oils of different viscosities. Then repeat the procedure listed above for the next demo. If the oils are oxidized or mixed with others, please use new oils for the next demo.
  • Please make sure the duration of pumping out of any leftover oil in the pipes is NO more than 20 seconds, to avoid damage to the tool by pumping air in.

HEALTH AND SAFETY

  • Engine oils are flammable, please pay close attention. No smoking or any fire-lighting activity is allowed during the demo process.
  • Tools must be operated under the supervision of a trained mechanic within a controlled environment wearing protective gloves.
  • Protect the environment and dispose of used items properly.

MORE IN MOTORISTS

Extraordinary User Experience

Shell Lubricants has always been committed to providing better and excellent products and services. Check out more about our past activities and more about the first-hand experience of Shell Lubricants users. 

Motorsports

Shell's technical partnership with Scuderia Ferrari, race and rider profiles for the Shell Advance Asia Talent Cup and follow the Ducati team

Shell Helix car engine oils

Designed to meet your needs – whatever your driving challenges. Discover the full product range.